August 17, 2022

News,stories and articles about any interest!

How to deal with moisture in the ceiling?

4 min read

Moisture on the ceiling and walls is one of the most common but also the most difficult problems you can face in your home – Αποφράξεις Αντωνίου – . In most cases, the phenomenon appears as mold and takes the form of yellow spots, while it usually causes peeling of the wallpaper and the color of the walls.

But where does the moisture in the ceiling and walls come from?

The reasons that can lead to moisture and mold on the ceiling and walls of your home vary. The moisture in the ceiling is mainly due to the entry of water from cracks in the walls, plumbing damage, lack of external thermal insulation or even from water vapor in the bathroom and cooking.

How can you deal effectively with moisture on the ceiling and walls?

The most important point in dealing with humidity is locating the source of the problem. So let’s see what are the three main factors responsible for the humidity in the ceiling. There is a different solution for each of the above sources of problems!

Repair of plumbing faults

Damage to the plumbing is one of the most common causes of dampness in the ceiling, especially in the bathroom. In the event that there is a fault in the plumbing of your home, unfortunately the problem is quite large and will continue to grow if you do not immediately take care of solving it. So, if you want to avoid the spread of moisture on other walls, it is necessary to turn to a plumber.

Humidity in the bathroom exists by the nature of the space. If there is water, it is a consequence that there is increased humidity in this area of ​​the house. What should we watch out for to avoid its appearance? The bathroom should be thoroughly ventilated. So after the shower the bathroom window should open for a long time. This way the moisture will leave to the environment and will not burden the bathroom.

If you have a ventilation system then turn it on as soon as you start your bath. Let the fan work for at least 10-15 minutes after you finish your bath. Make sure the ventilation system is working properly. A good test is that of the tissue. If the bathroom fan can hold the tissue then it has enough power. Install a ventilation system in your bathroom. Fans are a very good and economical solution for ventilation.

All the possible causes for the presence of moisture in the bathroom and in the house in general, mentioned above can be effectively treated as long as they are identified in time. Immediate treatment can provide a solution and you do not need to radically renovate the bathroom. But nothing replaces a proper design of the space. All wetting surfaces that come in contact with water should be properly designed. The shower area should definitely be tiled. A mirror and glass can also be used.

The tiles should be finished around 1.80-2.00m from the ground. The rest of the wall in the bathroom to be made with other materials without waterproof surfaces. Do not put tiles everywhere. Use other materials so that moisture does not get trapped in the bathroom and can diffuse.

The ceiling can remain as it is without being painted with oil paints. This way the bathroom will breathe better. Consider where you will place the windows and the ventilation system so that you have the least possible humidity.

In any case, if we notice swelling or cracking in the walls or ceiling of our bathroom, black spots or mold then we understand that there is moisture in our space. What is needed next is to identify the cause of the problem and intervene immediately and effectively to prevent its recurrence.

The importance of a dehumidifier

In case a room with very high humidity levels does not have an air conditioning system there is an easy and effective alternative, the dehumidifier. How does it work; This device essentially absorbs room air and removes moisture. The water is collected in a small container inside the unit, which you will need to empty. Prefer a portable dehumidifier that you can carry from room to room when the humidity increases.

In order to choose the right device for your space you will need to take into account certain factors. Its performance in a room will depend on the humidity level and of course the area of ​​the room. In a period of about 10 hours the device should be able to cover the room air at least 5 times.

Humidity in the ceiling is a problem that must be addressed immediately, as the damage it causes is not limited to the material damage of each building, but also extends to various health problems for its occupants, such as asthma or skin diseases.

If you have already detected the first signs of moisture on the ceiling of your house, do not be late to take the necessary measures to deal with it and call Αποφράξεις – Αντωνίου.

Read more about Αποφράξεις Αντωνίου:

Leave a Reply

Your email address will not be published.